Eureka Fluid Film - About Fluid Film: Fluid Film Newsletter

#1 | #2 | #3 | #4 | #5 | #6 | #7 | #8 | #9 | #10 | #11 | #12 | #13 | #14 | #15 | #16 | #17 | #18 | #19 | #20| #21| #22 | #23 | #24 | #25 | #26 | #27 | #28 | #29 | #30 | #31 | #32 | #33

The Online Forum Feedback Newsletter!

We advertise regularly in several online forums, from Lawn & Garden related to Personal Watercraft. We have found them to provide excellent feedback for our products, supplying first-hand application info that we can pass on to other customers.

For this latest newsletter, I thought I would post some of the recent forum comments concerning Fluid Film's effectiveness in different applications. Read a few or read them all. I guarantee you will come away with a greater appreciation for Fluid Film. There are links supplied to the forums the comments originated from.

LAWNSITE.COM

"We have used Fluid-Film on our overhead door rollers, office chairs, door hinges in 8 trucks, cables on our lawn spreaders, moving parts on our PG ride-ons, rusted (frozen) parts on previously unused parts on other stuff that now work again, as well as our push spreaders.
I sprayed it on all moving parts of our two PG units. Now the cable for the deflector shield works for the first time in years ............. on top of that, the cable was only sprayed once last week, and it still moves freely (until now, that was unheard of). We used to fight shifting gears on our PG's cuz they always got tight & hard to shift............not any more.
My boss dropped off 2 of the 8 cans to our local mechanics............now they plan to order Fluid Film as a permanent tool for their businesses too.
Thank you so much for this very fine product. WD-40 & the rest just don't last or hold up. We're sold on it, and I'm sure the news will spread."

"In the last 8 years I have used Fluid Film on all my decks undersides, the new Walker gets a healthy FF coating, at least weekly, some times more FF: GHS deck underside, blower housing internals. it shine's & no clogs..."

"This product is awesome! I applied 2000 #s of fert with my tractor tuesday, 3 point hitch pins were still wet & well lubed when i was done. Pins on my snowplow this winter, same deal. Yesterday I used it on my ratchet straps, they work like never before!! Im sold, goodbye wd 40!"

"I have to admit, this stuff is ridiculously good chit. I've used it on almost everything that moves around here, except people and dogs. I did use it on the dog leash collar clip thingy though. It kicks WD-40's arse off the planet. It even removed some rust from my hedge trimmer blades."

PLOWSITE.COM

"Take this to the Bank!

a. Same plow since 1999, and I have ALWAYS had to grind the rust off and prime at the end of the season,..but not THIS year. I will post some pics but she looks as good as the beginning of the season. Even the mount looks good.
b. I have ALWAYS struggled with the boss released pins,.. but NO MORE !!
c. just had the tailgate back apart for a broken wire and THERE IS NO RUST INSIDE THE BRONCO TAIL GATE --thank you so much !!!
We are going to clean her up and put her up on the hoist and FF from front to back
I have had a lot of great help and advice for truck and plow this season and very grateful to Plowsite friends, but my best find is FF
Still love to watch the squirrels try to get up the feeder posts after I FF them !!
Thanks for your help this season, saving me time and headaches -- and my Bronco tc Kc and Jetta, too"

"I sprayed it on my plow early November. I have done 290 driveways/plows since then and the snow just started to stick after roughly 270 driveways/plows."

"I was very skeptikal of Fluid Film after trying everything on the market to keep the salt from destroying our equipment. So, after about 2 months, one application, here is how it looks. There is some rust, but, it WAS there before we applied Fluid Film. Nothing sticks to the plow (including salt), and one can was just right. All I can say is just order a can, you will never go back."

"I sprayed a sample can on my truck frame back in September. Bought a case of spray cans in November. I just washed the truck down underneath on Tuesday. Put it on the lift for a service and safety inspection. The fluid film was still where I sprayed it, 4 months ago. So I used about 1-1/2 cans to spray the rest of the frame and what I wanted to underneath. Looks like it really stays to where you spray it."

"Note: I brush on FF with a sponge brush on my poly ( 1999) Boss.
We had very wet snow and whenever I was in a position to see the
'front' of the plow-- there was no snow on the mold-board.
But--here is the 'new use'
After 3 days of my finger tips painfully cracking, trying even
mechanics rubber gloves,,.. I tried FF
Yep, I looked at the foam brush as I put it in the plastic bag and wiped it
on my hand.
Admit that everything I picked up for the next hour slipped out of my hand --
but a quick paper towel and all was okay.
Really! My hands are much better !!
Second note: I put FF on my taillights and have not wiped snow off the
lights for 3 days of plowing.
Satisfied and grateful"

"About a month or two ago, my oldest son said his snowboard was slow on the hill cause of scratches and dings and he wanted a new one. Told him to Fluid Film the bottom and try that first. He applied it (will try to post pics later) and went out and said was much better. Asked him after some time and he said he was still impressed and made the board faster and the snow doesn't stick to bottom. Think the torch has passed and saved $$$ on a new board."

PWCTODAY

"I have used it on everything in the house!! I sprayed my door hinges about 3 weeks ago and the drip on one is still liquid like..this stuff does not dry up and it has been great!! I will be ordering more. I like the fact that it is not solvent based and is easy on the paint! I highly recommend using it!!

"Ok I'm in the middle of putting my snow plow mount on my truck but I have to give Fluid Film a quick review. In the spring I sprayed down the mount and all hardware except two bolts. All the parts sprayed with Fluid Film are still free and easy to move, the others are not, and this was after sitting outside all summer. Today I sprayed down another bolt and nut and it does a really good job of lubricating the parts."

"...so funny. I am just marveling at the stuff myself. I used it to protect some stuff on my car earlier this year (late winter, early spring). I'm highly impressed with the protection/lubrication qualities. I'll be looking for some to add to the garage!"

"hats off to fluid film. it is a product that is actually way better than advertised. i've found endless uses for it."

GREEN HULK FORUM

"ES (Forum member) turned me on to Fluid Film and it's made a believer out of me.
It's the best stuff I have ever used. The best thing about it is, it clings to a surface and will not run all over the place like silicone spray. I not only used it on my ski, I have squirted everything around my house that needed some lubricant."

"The stuff works GREAT! Almost too good LOL. I mostly spray the bolts inside the hull, and every bolt up on the latch, throttle body, stearing column, okay, EVERYWHERE. And it LASTS. Thats the important thing."

"The stuff works great. You will be able to tell where there is Fluid Film and where you missed. It is that obvious."

If you have found some exceptional uses for Fluid Film yourself, please take the time to let us know by leaving a comment in the Feedback section at the bottom of this page.

Check out the Fluid Film Song! written and recorded by Dantallion. Contact Rob Blowers of Dantallion for interest in their billboard award winning music!

BTW, the video was created by one of the Plowsite.com members.