#1 | #2 | #3 | #4 | #5 | #6 | #7 | #8 | #9 | #10 | #11 | #12 | #13 | #14 | #15 | #16 | #17 | #18 | #19 | #20| #21| #22 | #23 | #24 | #25 | #26 | #27 | #28 | #29 | #30 | #31 | #32 | #33 | #34 | #35

The Landscapers Newsletter!

In the landscaping industry, equipment reliability is crucial for success. With regular and prolonged output, landscaping equipment needs to be properly and consistently maintained. Fluid Film can make a substantial difference in equipment health and reliability.

On mowers, there are numerous applications where Fluid Film will cut maintenance time and enhance equipment performance. When applied under a clean mower deck, Fluid Film will cut scraping time by reducing dirt and grass build-up. The product works especially well when used in bulk and applied by brush.

Lubricating pivot points, mower seat springs, PTO shafts, hinges, tensions springs, rods and spindles with Fluid Film will help keep them lubricated longer. When used as a wax, Fluid Film protects paint from rusting and helps bring back old, oxidized paint jobs.

Fluid Film will not harm grass or greenery when used under mower decks or other cutting devices. It is also an excellent lubricant for hedge trimmers, loppers, pruners, or chainsaw blades, and will even help keep sap from sticking for easy clean-up.

Spray Fluid Film around hydroseeder fittings to prevent corrosion. Fluid Film prevents corrosion from salts, fertilizers and moisture.

Fluid Film also works wonders on trailer hitches, keeping them operating with ease, and will keep trailer balls lubricated and corrosion free..

Below are a few pics of some of the quality landscapers that use our products:

.
Send us a picture of Fluid Film being used on your equipment and we'll post it on our website!

Want a Fluid Film T-Shirt, Hat or Sticker?

You can get one free for a limited time. Just write us a testimonial on why Fluid Film is your number #1 choice for corrosion prevention or lubrication, and we'll ship the item of your choice out. Shirts run M - 3XL, so don't forget to specify shirt size in your email..Send testimonials to dwilliams@eurekafluidfilm.com. Mark Free Offer in the subject headline.

Have you seen the test results?

Results of an outside, independent test. Each products was sprayed onto 3" x 6" cold-rolled steel panels, allowed to dry for twenty four hours and then placed in a Salt Spray Chamber for 1,176 hours (7 weeks), according to ASTM B117 standards