 |
       |
 |
  |
 |
||
|
#1 | #2 | #3 | #4 | #5 | #6 | #7 | #8 | #9 | #10 | #11 | #12 | #13 | #14 | #15 | #16 | #17 | #18 | #19 | #20| #21| #22 | #23 | #24 | #25 | #26 | #27 | #28 | #29 | #30 | #31 | #32 | #33 | #34 | #35 | #36 | #37 The Fluid Film Pictures Newsletter! We get so many pictures from Fluid Film fans that I thought this latest newsletter should highlight some of the different or unique applications available to the product. These pictures were either submitted to us directly or posted on a variety of different forums. I didn't think any labeling was necessary expect where a disclaimer needed to be provided.
And last but not least...
This picture was sent in as a joke and there needs to be a disclaimer: Want a Fluid Film T-Shirt, Hat or Sticker?
You can get one free for a limited time. Just write us a testimonial on why Fluid Film is your number #1 choice for corrosion prevention or lubrication, and we'll ship the item of your choice out. Shirts run M - 3XL, so don't forget to specify shirt size in your email..Send testimonials to dwilliams@eurekafluidfilm.com. Mark Free Offer in the subject headline.
Here are some of the latest testimonials from different forums where Fluid Film has proven its usefulness. "This stuff is great!! I've used the WD-40 and all the silicones and the CRC and I would NEVER go back!! I use it on everything...it doesn't evaporate and stays put..I even use it on my hoor hinges and garage door rollers and it never drips. I'm ready to order more.." "I have been using it for years on my boat trailer and jetski trailer. I live around saltwater and this stuff is great if you don't want to change leafsprings, clamps and lugnuts." "I use it on my hedge trimmer blades, it cut the deposit down at least 70% to 80%. So I have to say it works very well."
Have you seen the test results?
Results of an outside, independent test. Each products was sprayed onto 3" x 6" cold-rolled steel panels, allowed to dry for twenty four hours and then placed in a Salt Spray Chamber for 1,176 hours (7 weeks), according to ASTM B117 standards |
|
|||
|
|
|
||
|
to top | |
||
|
|
|
 |
 |
 |
 |
