#1 | #2 | #3 | #4 | #5 | #6 | #7 | #8 | #9 | #10 | #11 | #12 | #13 | #14 | #15 | #16 | #17 | #18 | #19 | #20| #21| #22 | #23 | #24 | #25 | #26 | #27 | #28 | #29 | #30 | #31 | #32 | #33 | #34 | #35 | #36 | #37

The Mower Deck Newsletter!

Fluid Film helps keep grass from clumping under mower decks. It also keeps mowers free from any corrosion caused by fertilizers or moisture. Here is a test that was submitted to us by JMC Landscaping, a landscaping company out of New Hampshire.

These first two pictures show the mower deck after being cleaned, prior to an application with Fluid Film.

The following two pictures show the deck after Fluid Film was applied.

This is how the deck looked after cutting two lawns (Lawn size in all tests varied from 1/4 acre to 1/2 acre).

The deck was now cleaned, another application of Fluid Film was applied, and 8 more lawns were cut. This is how the deck looked after 8 cuts:

This is what the deck looked like after 15 lawns:

The final look is after 21 lawns:

With the regular use of Fluid Film (Applied by brush in bulk form for best results), mower deck maintenance can be eased and deck build-up cut down. Below are a few testimonials regarding Fluid Film's use for this application:

"I first sprayed the FF on the bottom of my deck though, and the grass was tall and thick with all the rain we have had in the past week here in VA. Not a piece stuck - literally. My deck is fairly new so it had good paint to spray it on but I was completely amazed. I had prepped with my 5 in 1 painters tool and the deck was clean but it wouldn't have dropped every blade of grass the way it did without the Fluid Film - strongest recommendation from me."

"I try to do it everytime I change my blades, works really well in preventing grass build up on my new Triton. Sprayed it before clean-ups and the other day when we changed our blades the deck was clean as new."

"We use it on our snow and ice equipment, it is the absolutely best thing you can get to prevent rust on a plow. We do our decks too."

"This morning, I mowed my soaking wet grass (after 2" of rain overnite). I removed approximately the top 2.5" off the top with absolutely NO CLUMPING whatsover. And yes, the underside of the deck was coated with Fluid Film - two yards ago. BTW, the underside still has no build-up of grass."

"Get the deck VERY clean, let it dry completely, then apply it thoroughly. By thoroughly I I mean make sure every part of the deck is covered. It doesn't have to be dripping from over-applying. Personally, I apply it at the end of the day, let it "sit" overnight, and the next day you are good-to-go."

Want a Fluid Film T-Shirt, Hat or Sticker?

You can get one free for a limited time. Just write us a testimonial on why Fluid Film is your number #1 choice for corrosion prevention or lubrication, and we'll ship the item of your choice out. Shirts run M - 3XL, so don't forget to specify shirt size in your email..Send testimonials to dwilliams@eurekafluidfilm.com. Mark Free Offer in the subject headline.

Here are some of the latest testimonials from different forums where Fluid Film has proven its usefulness.

Have you seen the test results?

Results of an outside, independent test. Each products was sprayed onto 3" x 6" cold-rolled steel panels, allowed to dry for twenty four hours and then placed in a Salt Spray Chamber for 1,176 hours (7 weeks), according to ASTM B117 standards