The Perfect Answer to Control Corrosion in Boating

Salt water corrosion is an ongoing and expensive problem for the avid boating enthusiast, and there are numerous products on the market that claim to stop corrosion. There is, however, only one that stands up to the test. Fluid Film® has been tested, time and time again, by Government agencies and outside testing facilities to determine its effectiveness in a salt water atmosphere. Fluid Film protects all metals; including aluminum, chrome, brass, magnesium and steel, from the destructive effects of salt water, and will also protect against galvanic corrosion, the meeting of two dissimilar metals. Preserve and protect your boat, equipment and trailer from the destructive effects of salt water corrosion by using Fluid Film. The leader in corrosion control.

Click Here for the Online Forum Feedback Newsletter!

"I recently had to replace the leaf springs on a used boat trailer...Leaf springs cannot be coated with any success due to flexing. I researched various products...and chose Fluid Film. After a year the springs still look like new after many immersions in salt water." - Jonathan Costello

"I have had the opportunity to use...Fluid Film...on the engine of my off-shore racing boat...I have put sixty high speed hours on the engine and it continues to work well. It certainly has been superior as a lubricant and rust preventative" - Normand L. Lauze

• Battery Terminals:
  Fluid Film® is non-conductive, so after you clean around the battery terminals make your connections, and then spray with Fluid Film®. The non-drying characteristics of Fluid Film® will provide long term protection in this application.

• Boat Trailers:
  Apply to all electrical connections for lighting system, suspension leaf springs and spring hangers, hull rollers (bearings or bushings), hitch coupling connections, ball hitch, height Adjustors, winch, any exposed metal.

• Cables

• Chains

• Channels

• Control Cables

• Drive-line (transmission shifter)

• Electronic Equipment:
  Fluid Film® is non-conductive, and will not harm electrical connections. Make sure that connections are made before applying Fluid Film. Will protect both the fuse block and the end connectors.

• Fishing gear
  Lightly coat to protect from salt spray. Use Fluid Film® to lubricate screws, bearings, cogs, drag washers and use as a protective coating.

• Gears

• Ground Tackle

• Guides

• Hinges

• Levers

• Locks:
  Spray small amount of Fluid Film® in lock. Will not freeze, making cold weather applications especially desirable, providing long-term lubrication.

• Nuts & Bolts

• Outboard Engines including interior housing from salt spray

• Pulleys

• Rollers

• Sail Slides
  

• Spray on entire surface of engine when winterizing to reduce corrosion

• Stanchions

• Steering

• Tackle Boxes

• Throttle, Steering and Shift linkages:
  Fluid Film® will protect and lubricate.

• Thru-Hull fittings

• Winches

• Windlasses

• Wire-Rope
  
  Questions or suggestions regarding this page? Contact us and we'll get to work on improving it.